Class 1000 Washable Anti-static Cleanroom Garment

Class 1000 Washable Anti-static Cleanroom Garment

Read more:

See more video clip:

Quick Details of Class 1000 Anti-static Cleanroom Garment

  1. Place of Origin: Guangdong, China (Mainland) 
  2. Brand Name: ELESTECH 
  3. Model Number: ES1105 
  4. Item: Anti-static work clothes 
  5. OEM Service: OEM Service 
  6. Material: 35% cotton+63% polyester/98%polyester+2% conductive fiber 
  7. Application: EPA 
  8. Conductive yarn: 2.5/5mm grid 
  9. Warp/weft: 100D*100D or 75D*75D 
  10. Weave: 1/2 twill 
  11. Weigth: 130g 
  12. Surface resistance: 10^6-10^9 Ohm 
  13. Wash: 30C normal washing 

Anti-static Cleanroom Garment Packaging & Delivery

Packaging Details: 1pc/bag, 50pcs/ctn
Delivery Detail: 7-14days

Class 1000 Anti-static Cleanroom Garment Specifications

1, Material: 98% polyester+2% conductive fiber 
2, Unisex design 
3, 2.5/5mm grid, 5mm check 
4, Customization is available 

anti-static cotton garment , Cleanroom garment , antistatic garment , cleanroom coverall

In the use of antistatic clothing notices should be taken as follows:

Generally dont use non-antistatic fabric as lining. When needed, the use of lining should not exceed 20% of the total area of the lining. Operators in antistatic work area may not wear clothing from.

Don't adorn any metal annex. When needed, it shouldnt be directly disclosed to the dress surface, in order to avoid metal discharge. wear antistatic clothing before entering antistatic work area.

Antistatic clothing should be designed to be three -tight, and be good at resistance and preventing dust.

Antistatic clothing must be use with antistatic shoes. According to the national standard, check up them every other year. If value of electricity exceeds set value, they couldnt be used as before.
If relative humidity is below 40%, cotton clothing is not suitable for antistatic clothing, because it failed to prevent accumulation of static electricity.

Groundable static control garment system.

Allows operators and smock to be bonded or electrically connected to ground to prevent ESD events in ESD Protected Areas. 2% conductive carbon fiber woven in chain-link design.

Provides continuous and consistent charge dissipation throughout lifetime of smock.

Creates Faraday cage effect around operator.

Shields ESD charges from operators' clothing from damaging ESD sensitive devices.

Panel to panel conductivity.

Prevents isolated charged conductor in ESD Protected Area.

Static dissipative (ESD) Smock for use in Cleanroom areas

Composition of fabric - Class 1000 Anti-static Cleanroom Garment:

 35% cotton+63% polyester+2% conductive fiber

Wrap density: 350±10/10cm
Unisex design 

Available in all sizes 

  • Colors available: white, green, light blue and etc 
  • Typical surface resistance 
  • Rs ≤107Ω
  • Permeability to air: 4.5 to 5.0ml/s
  • Permeability to water: 55.00 to 60.00g/hr